- Performance and Scalability
With high switching capacity, CS6200 series support wire-speed L2/L3 forwarding and high routing performance for IPv4 and IPv6 protocols.
The 10 Gigabit Ethernet connectivity of CS6200 is accomplished via a hot-pluggable 10 Gigabit SFP+ transceiver which supports distance up to 300 meters over multimode fiber and 10 to 40km over single-mode fiber(The distance depends the optical module chosen).
CS6200 series support modular redundant AC and DC power supplies for different environment applications.
CS6200 supports OpenFlow1.0 standard protocol. OpenFlow network is increasingly becoming a trend as the core protocol of SDN network. It makes the network easier programming OpenFlow brings the high performance to datacenter users via self-defined network. With OpenFlow, this product is ideal to build SDN test-bed for research institutes and SDN Experimental Bureau for large ISP and operator.
- VSF(Virtual Switch Framework)
Virtual Switch Framework can virtualize multiple DCN switches into one logical device, achieving the sharing of information and data tables between different switches. The performance and ports density of virtualized device are greatly enlarged by times under VSF. VSF also provides simplified management work for network administrator and more reliability.
- Rich L3 Features
CS6200 series delivers high-performance, hardware based IP routing.
RIP, OSPF and BGP provide dynamic routing by exchanging routing information with other Layer 3 switches and routers.
With CS6200 series, customers could easily achieve Policy based Route(PBR), which is important when they need multi exit application.
- Strong Multicast
CS6200 series supports abundant multicast features. In Layer 2, such as IGMPv1/v2/v3 snooping and fast leave. L3 multicast protocols such as IGMPv1/v2/v3, PIM-DM, PIM-SM, PIM-SSM and even MSDP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions; CS6200 series provides great application experience for customer.
- Easy High Reliability network
MRPP is Multi-layer Ring Protection Protocol, which is DCN’s private fast Ethernet ring protocol. Comparing to spanning tree protocol, it has advantages of fast convergence, simple protocol calculation, less system resources cost and so on, which can improve the reliability of Ethernet network operation.
- Comprehensive QoS
With 8 queues per port, CS6200 series enable differentiated management of up to 8 traffic types. The traffic is prioritized according to IEEE802.1p, DSCP, IP precedence and TCP/UDP port number, giving optimal performance to real-time applications such as voice and video.
CS6200 series also supports Bi-directional rate-limiting, per port or traffic class, preserves network bandwidth and allows full control of network resources.
- Enhanced Security
IEEE 802.1X port-based access control and MAC-based access control ensure all users are authorized before being granted access to the network.
Ingress/Egress Access Control Lists (ACLs) can be used to restrict access to sensitive network resources by denying packets based on L2/L3/L4 headers information. And for some services are based on time, the product can support time based ACL to match the requirement.
Secure Shell (SSH) encrypts network management information via Telnet providing secure network management.
RADIUS Authentication enables centralized control of the switch and restricts unauthorized users from altering the configuration of the switch.
- Abundant IPv6 Support
CS6200 series supports IPv6 switching and routing based on hardware for maximum performance. With increased network devices growing and the need for larger addressing and higher security become critical, CS6200 series will be a right product to meet the requirement.
Temperature monitoring, alarming, automatic cooling, energy saving features are realized on CS6200. According to the temperature monitoring, Fan speed can be adjusted or stopped to reduce energy consumption and noise.
|Physical port||20 x 10/100/1000BaseT + 4 x GE Combo(GT/SFP) + 4 x 10GE(SFP+)|
|Management port||10/100/1000Mbps RJ45 Ethernet Management port|
|1 Console port (Micro USB for CS6200-52X-P-EI / RJ45 for others)|
|Routing Table||Max 13K|
|L3 Interface||Max 1K|
|Relative Humidity||10%~90% non-condensing|
|Temperature||Working 0°C~50°C, storage -40°C~75°C|
|Power Supply||2 power slots, 1+1 Modular Redundant|
|L1, L2 Features||IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4)|
|Port loopback detection|
LLDP and LLDP-MED
802.3ad LACP, max 128 group trunks with max 8 ports for each trunk
LACP load balance
|N:1 Port Mirroring|
|802.1Q, 4096 VLAN|
MAC VLAN, Vocie VLAN, PVLAN, Protocol VLAN, Multicast VLAN
QinQ, Selective QinQ, Flexible QinQ
N:1 VLAN Translation
Broadcast / Multicast / Unicast Storm Control
|IGMP v1/v2/v3 Snooping and L2 Query|
|Flow Control: HOL, IEEE802.3x|
|L3 Features||Static Routing,RIPv1/v2,OSPFv2,BGP4|
OSPF multiple process
Policy-based Routing(PBR) for IPv4 and IPv6
|IGMP v1/v2/v3, IGMP Proxy,|
DVMRP,PIM-DM,PIM-SM,PIM-SSM, Any Cast RP, MSDP
Static Multicast Route
Multicast Receive Control
Illegal Multicast Source Detect
|ARP Guard, Local ARP proxy, Proxy ARP, ARP Binding, Gratuitous ARP, ARP Limit|
Anti ARP/NDP Cheat, Anti ARP/NDP Scan
|DNS Client, DNS Relay|
|IPv6||6to4 Tunnel, Configured Tunnel, ISATAP Tunnel, GRE Tunnel|
IPv6 LPM Routing,IPv6 Policy-based Routing(PBR)
IPv6 VRRPv3,IPv6 URPF,IPv6 RA
MLD Snooping,IPv6 Muticast VLAN
MLDv1/v2, PIM-SM/DM for IPv6, IPv6 Any Cast RP, IPv6 ACL, IPv6 QoS
SWRR, SP, WRR, DWRR, SDWRR, WRED
Traffic Classification Based on 802.1p COS, ToS, DiffServ DSCP, ACL, port number
|ACL||IP ACL ,MAC ACL,IP-MAC ACL|
Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS
REDIRECT and Accounting based ACL
Rules can be configured to port, VLAN, VLAN routing interfaces
Time Ranged ACL
Port, MAC based authentication
Accounting based on time length and traffic
Guest VLAN and auto VLAN
|RADIUS for IPv4 and IPv6|
|TACACS+ for IPv4 and IPv6|
|DHCPv4/v6||DHCP Server/Client for IPv4/IPv6|
DHCP Relay/Option 82
DHCP Snooping/Option 82
|Traffic Monitor||sFlow Traffic Analysis|
|Security Network Management||CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6|
Syslog and external Syslog Server
SNMP MIB, SNMP TRAP
Authentication by Radius/TACACS
Dual firmware images/ Configuration files
802.3ah OAM, 802.1ag OAM
|Data Center Features||VSF(Virtual Switch Framework)*|
(support open controller Opendaylight, Floodlight, Ryu, Pox, etc.)
|CS6200-28X-EI||10G Ethernet Routing Switch, 20 x 10/100/1000BaseT + 4 x GE Combo(GT/SFP) + 4 x 10GE(SFP+), modular power (2 power modules at most, 1+1 redundancy. Standard with no power module)|
|CS6200-28X-P-EI||10G PoE Ethernet Routing Switch, 20 x 10/100/1000BaseT + 4 x GE Combo(GT/SFP) + 4 x 10GE(SFP+), modular power (2 power modules at most, 1+1 redundancy. Standard with no power module), up to 740W for PoE|
|CS6200-52X-P-EI||10G PoE Ethernet Routing Switch, 48 x 10/100/1000BaseT + 4 x 10GE(SFP+) + 2 Stacking port, modular power (2 power modules at most, 1+1 redundancy. Standard with no power module), up to 740W for PoE|
|CS6200-28X-HI-24F||10G Ethernet Routing Switch, 16 x GE Combo(GT/SFP) + 8 x GE(SFP) + 4 x 10GE(SFP+) + 2 stacking port, modular power (2 power modules at most, 1+1 redundancy. Standard with no power module)|
|M6200-AC-A||AC power supply, 150W, fit for CS6200-28X-EI and CS6200-28X-HI-24F|
|M6200-AC-B||AC power supply, 600W, fit for CS6200-28X-P-EI and CS6200-52X-P-EI|
|M6200-AC-C||AC power supply, 920W, fit for CS6200-28X-P-EI and CS6200-52X-P-EI|
|M6200-DC-A||DC power supply, 150W, fit for CS6200-28X-EI and CS6200-28X-HI-24F|
|AOC-SFPX-10M||AOC cable with 2 10G(SFP+) modules, 10m, suitable for SFP+ ports on same model of switch, can be used for VSF|
|DAC-SFPX-3M||DAC cable with 2 10G(SFP+) modules, 3m, suitable for SFP+ ports on same model of switch, can be used for VSF|
|DAC-QSFP-5M||DAC cable with 2 40G(QSFP) modules, 5m, suitable for QSFP ports on same model of switch, can be used for VSF|