AOC-SFPX-10M

AOC-SFPX-10M is a 10Gb/s, hot pluggable active optical cable for Ethernet data transmission. It provides full duplex operation and supports distance up to 10 meters.

General Details
AOC-SFPX-10M is a 10Gb/s, hot pluggable active optical cable for Ethernet data transmission. It provides full duplex operation and supports distance up to 10 meters.

AOC-SFPX-10M is composed of optical transceivers in both ends and multimode fiber cable in between. This integrated optical module solution removes the complicated optical fiber interface and brings friendly and intuitive electrical-to-electrical interface to users.

AOC-SFPX-10M is designed to meet the requirements of high speed, high density and low power consumption for applications in today’s data centers.

Product Feature
  • Compliant to industrial standard SFP MSA
  • High speed / high density: support up to 10

Gb/s bi-directional operation.

  • Low power consumption : less than <0.35W

per end.

Applications

˜  10G Ethernet

˜  Proprietary high speed, high density data

˜  High performance computing, server and

data storage.

  • Reliable VCSEL and PIN photonic devices
  • I2C standard management interface
  • Excellent high speed signal integrity
  • Operating temperature Options
    • (Commercial) 0oC to +70oC
  • RoHS Compliant
Specification
PinNameFunction/Description

Notes

1VeeTTransmitter Ground1
2TX_FaultTransmitter Fault (LVTTL-O) – High indicates a fault condition2
3TX_DisableTransmitter Disable (LVTTL-I) – High or open disables the transmitter3
4SDATwo wire serial interface Data Line (LVCMOS-I/O) (MOD-DEF2)4
5SCLTwo wire serial interface Clock Line (LVCMOS-I/O) (MOD-DEF1)4
6MOD_ABSModule Absent (Output), connected to VeeT or VeeR in the module5
7RS0Rate Select 0 – Not used, Presents high input impedance
8RX_LOSReceiver Loss of Signal (LVTTL-O)2
9RS1Rate Select 1 – Not used, Presents high input impedance
10VeeRReceiver Ground1
11VeeRReceiver Ground1
12RD-Inverse Received Data out (CML-O)
13RD+Received Data out (CML-O)
14VeeRReceiver Ground
15VccRReceiver Power – +3.3V
16VccTTransmitter Power – +3.3 V
17VeeTTransmitter Ground1
18TD+Transmitter Data In (CML-I)
19TD-Inverse Transmitter Data In (CML-I)
20VeeTTransmitter Ground1

 

Notes:

  1. The module signal grounds are isolated from the module case.
  2. This is an open collector/drain output that on the host board requires a 4.7KΩ to 10KΩ pull-up resistor to VccHost.
  3. This input is internally biased high with a 4.7KΩ to 10KΩ pull-up resistor to VccT.
  4. Two-Wire Serial interface clock and data lines require an external pull-up resistor dependent on the capacitance load.
  5. This is a ground return that on the host board requires a 4.7KΩ to 10KΩ pull-up resistor to VccHost.

Order Information
Part NumberReachTempRoHS
AOC-SFPX-10M10m0 ~ 70 oCCompliant
OTHER

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Table 3. Absolute Maximum Ratings

ParameterSymbolMinimumMaximumUnit
Storage TemperatureTS-4085oC
Relative HumidityRH585%
Supply VoltageVCC03.6V

 

Recommended Operating Conditions

Table 4. Recommended Operating Conditions

ParameterSymbolMinTypMaxUnit
Operating Case TemperatureAOC-SFPX-10MTC02570oC
Supply VoltageVCC3.1353.33.465V
Data Rate10.3Gb/s

 

 

Transceiver Electrical Characteristics

Table 5. Transceiver Electrical Characteristics

ParameterSymbolMinimumTypicalMaximumUnitNotes
+3.3V Supply CurrentIcc100mA
Power DissipationPD350mW
Low speed output:

Transmitter Fault(TX_FAULT) /

Loss of Signal (LOS)

VOH2.0VccV1
VOL00.8V1
Low speed input:

Transmitter Disable (TX_DISABLE), MOD_DEF 1, MOD_DEF 2

VIH2.0VccV2
VIL00.8V2
Clock Rate-I2Cf400kHz3

Notes:

  1. For all control input pins: TX_DISABLE.
  2. For all status output pins: RX_LOS, TX_FAULT.
  3. For management interface.

 

Transmitter Optical Characteristics

Table 6. Transmitter Optical Characteristics

ParameterSymbolMinimumTypicalMaximumUnitNotes
Reference Differential Input

Impedance

Zd100Ω1
Signal Speed10.3Gb/s2
Differential Data Input SwingVin_pp180600mV

Notes:

  1. AC coupled inside AOC module.
  2. Tested with PRBS2^31-1 BER: 10E-12.

Receiver Optical Characteristics

Table 7. Receiver Optical Characteristics

ParameterSymbolMinimumTypicalMaximumUnitNotes
Reference Differential Input

Impedance

Zd100Ω1
Signal Speed10.3Gb/s2
Differential Data Output Swing150850mV
Differential Data Output Swing

When Squelched

50mV
Rise / Fall Time (20% ~80%)24ps

Notes:

  1. AC coupled inside AOC module.
  2. Tested with PRBS2^31-1 BER: 10E-12