CS6550-48S6Q-SI has 48 10G SFP+ and 6 40G QSFP+ ports with 1.44Tbps switching capacity. With VxLAN and SDN/OpenFlow advanced features, it is a cost-effective, high-density 10G access switch as its high performance and reliability.
- Performance and Scalability
With multi-core CPU and 1.44Tbps switching capacity, CS6550 supports wire-speed L2/L3 forwarding and high routing performance.
The 10 Gigabit Ethernet connectivity of CS6550-SI is accomplished via a hot-pluggable 10 Gigabit SFP+ transceiver which supports distance up to 300 meters over multimode fiber and 10 to 40km over single-mode fiber (The distance depends the optical module chosen).
- High Reliability
CS6550 series support modular 1+1 redundant power supplies and 4+1 redundant fans. Business won’t be interrupted in case replacing power supplies and fans. System supports dual images. Even though the primary image was destroyed, system will still boot via backup image normally.
- Abundant Data Center Features
As new generation data center switch, CS6550 support VxLAN and SDN/OpenFlow1.0&1.3 which not only guarantees the flexibility, but also enhanced the scalability of datacenter network.
OpenFlow network is increasingly becoming a trend as the core protocol of SDN network. It makes the network easier programming OpenFlow brings the high performance to datacenter users via self-defined network. With OpenFlow, this product is ideal to build SDN test-bed for research institutes and SDN Experimental Bureau for large ISP and operator.
- Flex Resource
Flex Resource is able to allocate, recover and reallocate hardware resource dynamically according to demand. It can increase the utilization of the hardware resource.
|Physical port||48 * 10G SFP+ and 6 * 40G QSFP+|
|Management port||Console port RJ45|
10/100Mbps RJ45 Ethernet Management port
USB2.0 Management port
|Relative Humidity||10%~90% non-condensing|
|Temperature||Working 0°C~45°C, storage -40°C~75°C|
|Power Input||AC: 100~240V,50~60 Hz|
|Power Supply||1+1 Modular Redundant|
|L1, L2 Features||IEEE 802.3(10Base-T), IEEE 802.3u(100Base-TX), IEEE 802.3z(1000BASE-X)|
IEEE 802.3ab(1000Base-T), IEEE 802.3ae(10GBase), IEEE802.3x
|9k Jumbo Frame|
|N:1 Port Mirroring|
|802.1Q, 4096 VLAN|
MAC VLAN, VOICE VLAN, Protocol VLAN, Super VLAN, VxLAN
|Flow control: HOL, IEEE802.3x|
|L3 Features||Static Routing, RIPv1/v2,OSPFv2, BGP4|
Traffic Classification Based on 802.1p CoS, ToS , DiffServ DSCP, ACL, port number
|ACL||IPv4 ACL inbound and out bound|
Dynamic modification of ACL
Statistics ACL based
Redirect ACL based
|Network Management||CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6|
Syslog and external Syslog server
SNMP MIB, SNMP TRAP
Authentication by radius
Dual firmware images/ Configuration files
|Data Center Features||VxLAN|
OpenFlow 1.0 and 1.3
(support open controller Opendaylight, Floodlight, Ryu, Pox, etc.)
|CS6550-48S6Q-SI||40G Ethernet Optical Routing Switch, 48 * 10G SFP+ and 6 * 40G QSFP+ ports. Standard with no power module, 5 fan modules. At most, 2 power modules (1+1 redundancy) and 5 fan modules (4+1 redundancy) can be installed in this switch.|
|M6550-AC||AC Power Supply Module (460W) for CS6550-48S6Q-SI|
|QSFP-SR||40G QSFP module (OM3 100m, OM4 150m), MTP|
|AOC-SFPX-10M||AOC cable with 2 10G(SFP+) modules, 10m, suitable for SFP+ ports on same model of switch, can be used for VSF|
|DAC-SFPX-3M||DAC cable with 2 10G(SFP+) modules, 3m, suitable for SFP+ ports on same model of switch, can be used for VSF|
|DAC-QSFP-5M||DAC cable with 2 40G(QSFP) modules, 5m, suitable for QSFP ports on same model of switch, can be used for VSF|