WL8200-WL2 802.11ac Wi-Fi Точки Доступа внутреннего исполнения на стене

The WL8200-WL2 is a new-generation 802.11ac-based high-performance wireless access point (AP) newly launched by Digital China Networks Co., Ltd.

General Details
The WL8200-WL2 is a new-generation 802.11ac-based high-performance wireless access point (AP) newly launched by Digital China Networks Co., Ltd. (hereinafter referred to as DCN) for the hotel, education and enterprise industry.

WL8200-WL2 can be installed in a standard 86 panel and its thickness is only 22mm, without the need for reconstruction of the wall, a small amount of construction, no noise; It don’t destroy original decoration, it has beautiful appearance after installation. WL8200-WL2 supports the 802.11AC standard, 2.4G band could provide 300M bandwidth and 5G band could provide 433M bandwidth, so the highest available wireless bandwidth of 733M.

WL8200-WL2 provide one 100M uplink Ethernet port and two downlink 100M Ethernet ports, the uplink port could support 802.3af POE, so Wl8200-WL2 not only could provide high performance WIFI coverage, but also could provide extra wired connection.

Highlights
  • Easy to deploy – Quick installation

WL8200-WL2 could be installed in a standard 86 panel, could be installed quickly with just fixing two screws, so install one AP just need less than 5 minutes. WL8200-WL2 can be installed in a standard 86 panel and its thickness is only 22mm, without the need for reconstruction of the wall, a small amount of construction, no noise; It don’t destroy original decoration, it has beautiful appearance after installation.

  • High load capacity – SOHO chip

WL8200-WL2 adopts Atheros chip of enterprises class, a more powerful CPU, while a lot of wall-mounted AP vendors use SOHO chip. Domestic AP products with SOHO chip are very inappropriate to be deployed in the enterprise, school and the hotel. Firstly, when the number of access users is up to 10, it is not stable, and it will require a restart, but WL8200-WL2 has a strong load capacity with the use of enterprise class chips, can completely meet the needs of the school dormitory, Hotel wireless access.

  • Coverage – Super sensitivity and intelligent velocity molding technology allow AP to cover through walls

WL8200-WL2 expands its coverage by improving receiving signal sensitivity, easily go through the thick walls. The wireless signal transmission is bidirectional; Increase of coverage must guarantee the normal reception of the weak signal. With built-in intelligence WL8200-WL2 beam forming technology form the strongest signal in the direction of the mobile access terminal, enhance the strength of the signal of the mobile terminal. General domestic level SOHO AP simply increase the transmit power through illegal expansion of coverage, signal strength is inflated and the machine is hot when it works, can not guarantee the normal reception and transmission of weak terminal data.  Setting cloth in traditional corridor will often result the weak signal in the toilet cover because of the indoor wall structure。

  • High performance, excellent WIFI access – 733Mbps

WL8200-WL2 is DCN’s fourth generation AP, it is used for student dormitory and hotel, it improves the performance from 300Mbps to 733Mbps. It is the first 733Mbps in-wall AP in the industry. WL8200-WL2 is an ideal choice for high-speed Internet access and in-wall equipment connection.

 

Specification
Hardware specifications

ItemWL8200-WL2
Dimension (mm)86×86×22
Ethernet ports1 X 10/100Base-T uplink port, 2 X 10/100Base-T downlink ports
PoE power802.3af/802.3at
Maximum power consumption<6W
Antenna gain4dBi
Working frequency band802.11a/n : 5.150 GHz to 5.850 GHz

802.11b/g/n : 2.4 GHz to 2.483 GHz

802.11ac:

5.150GHz to 5.250GHz

5.250GHz to 5.350GHz

5.725GHz to 5.850GHz

Modulation technology
802.11b:BPSK,QPSK,CCK

802.11a/g/n:BPSK,QPSK,16-QAM,64-QAM

802.11ac:BPSK,QPSK,16-QAM,64-QAM,256-QAM

Transmitting power17dBm
Power adjustment granularity1dBm
Working/Storage temperature0°C~50°C/-40°C~70°C
Working/Storage RH5% ~95% no condensing

 

Software specifications

ItemFeatureWL8200-WL2
WLANProduct positioningIn-wall dual band AP
Working frequency band2.4GHz and 5GHz
Virtual AP (BSSID)32
Number of spatial streams2.4 : 2

5G : 1

Dynamic channel adjustment (DCA)YES
Transmit power control (TPC)YES
Blind area detection and repairYES
SSID hidingYES
RTS/CTSYES
RF environment scanningYES
Hybrid accessYES
Restriction on the number of access usersYES
Link integrity checkYES
Prohibiting the access of terminals with weak signalsYES
Forced roaming of terminals with weak signalsYES
Intelligent control of terminals based on airtime fairnessYES
802.11ac enhancementNumber of spatial streams1
Working frequency band5GHz
80 MHz bundlingYES
433Mbps(PHY)YES
Frame aggregation (A-MPDU)YES
Frame aggregation (A-MSDU)YES
Maximum likelihood demodulation (MLD)YES
Transmit beam forming (TxBF)YES
Maximum ratio combining (MRC)YES
Space-time block coding (STBC)YES
Low-density parity-check code (LDPC)YES
8011n enhancementNumber of spatial streams2
Working frequency band2.4GHz
40 MHz bundlingYES
300 Mbps (PHY)YES
Frame aggregation (A-MPDU)YES
Frame aggregation (A-MSDU)YES
Maximum likelihood demodulation (MLD)YES
Transmit beam forming (TxBF)YES
Maximum ratio combining (MRC)YES
Space-time block coding (STBC)YES
Low-density parity-check code (LDPC)YES
SecurityEncryptionYES 64/128WEP、TKIP、CCMP encryption
802.11iYES
WAPIYES
MAC address authenticationYES
LDAP authenticationYES
PEAP authenticationYES
WIDS/WIPSYES
Real-time spectrum protectionYES
Protection against DoS attacksAnti-DoS for wireless management packets
Forwarding securityFrame filtering, white list, static blacklist, and dynamic blacklist
User isolationAP L2 forwarding suppression

Isolation between virtual APs (multiple SSIDs)

Periodic SSID enabling and disablingYES
Access control of free resourcesYES
Secure admission control of wireless terminalsSecure admission control of wireless terminals based on DCSM
Wireless SAVIYES
ACLAccess control of various data packets such as MAC, IPv4, and IPv6 packets
Secure access control of APsSecure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC
ForwardingIP address settingStatic IP address configuration or dynamic DHCP address allocation
IPv6 forwardingYES
IPv6 portalYES
Local forwardingYES
MulticastIGMP-SNOOPING
RoamingFast roaming across APs

Fast roaming across ACs

AP switching referenceSignal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc.
WDSYES
QoSWMMYES
Priority mappingEthernet port 802.1P identification and marking

Mapping from wireless priorities to wired priorities

QoS policy mappingMapping of different SSIDs/VLANs to different QoS policies

Mapping of data streams that match with different packet fields to different QoS policies

L2-L4 packet filtering and flow classificationYes: MAC, IPv4, and IPv6 packets
Load balancingLoad balancing based on the number of users

Load balancing based on user traffic

Load balancing based on frequency bands

Bandwidth limitBandwidth limit based on APs

Bandwidth limit based on SSIDs

Bandwidth limit based on terminals

Bandwidth limit based on specific data streams

Power saving modeYES
Automatic emergency mechanism of APsYES
Intelligent identification of terminalsYES
Wireless network VASAbundant wireless network VASs; applications based on smart terminals; advertisement push based on site locations; personalized push of the portal
Multicast enhancementMulticast to unicast
WMMYES
ManagementNetwork managementCentralized management through an AC; both fit and fat modes
Maintenance modeBoth local and remote maintenance
Log functionLocal logs, Syslog, and log file export
AlarmYES
Fault detectionYES
StatisticsYES
Switching between the fat and fit modesAn AP working in fit mode can switch to the fat mode through a wireless AC;

An AP working in fat mode can switch to the fit mode through a local control port or Telnet.

Remote probe analysisYes
WatchdogYes
Network managementCentralized management through an AC; both fit and fat modes

 

Purchase Information
Product modelProduct descriptionRemarks
WL8200-WL2802.11AC dual band wireless indoor wall-mounted AP (support 2.4GHz &5.8GHz, the maximum bandwidth 733Mbps, the built-in antenna; support 1X 100M uplink port, 2 X 100M downlink ports, support 802.3af, support PoE remote power supply ) (the accessories have no POE power supply module)Mandatory